Flooring Jack 600


HD Timber Flooring Jack 600


Hardtouch® Flooring Jack 600  is the increased power of its previous version. It is suitable for use with all types of solid floors, engineering, laminate, or hybrid floors. Reinforced Flooring Jack 600  can be used during the subfloor installation process to push OSB, plywood, or particleboard panels.

The Flooring Jack 600 is an excellent helper for installers of wooden floors. It is usually used for compressing the last rows of floorboards when approaching a wall when the use of a Secret Stapler/Nailer is not possible due to lack of space. All the last rows of floorboards are compressed simultaneously using the flooring jack. One hand is enough to hold the compressed floorboards until the other hand can secure the boards in the current position with a Nailer.

The tool is strong enough that excessive force may damage the wall or floorboard. It is therefore recommended to place the board along the wall where the base of the plunger will rest. Use a board no shorter than one meter that allows you to increase the support area and distribute the compression force over a larger area. This will protect the wall when installing the plasterboard on the timber frame. Make sure that the protective board rests on the two perpendiculars of the wall frame.

The use of any additional tools to extend the pressure knob is prohibited. Unreasonable use of excessive force can damage the tool and you may also be injured. Always wear protective gloves and goggles when working.


Additional information

Weight 3.5 kg
Dimensions 40 × 15 × 12 cm

Ask us

If you have any questions or suggestions, please fill the form below, and we get back to you as soon as possible

Please use the form below or contact Us directly via email.


Call Us

If you have any questions or wish to be served outside of trade hours, please call us:
+61 4  2220 6530 or +61 2 8119 5343.